There are no products in your shopping cart yet.
DCC concepts
Loading...
Gas street/platform lamps - black - 4mm scale - DCC concepts
€ 37,70
Gas street/platform lamps - black - 4mm scale - DCC concepts
Pack Contents
3x 4mm scale wall lamps with 200mm connection wires
3x Resistor boards – suitable for connection to regulated DC power 6-12V
Installation Advice
Drill the mounting hole using a 2mm drill. Carefully thread the fine wires into the hole, then insert the lamp mounting tube.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
Power supply
Any regulated DC power supply between 6 and 15 volts will be suitable. (To save you any additional cost, you may find one in your bottom drawer, for example an unused mobile phone charger or any similar power supply).
More DCC concepts products
Pack Contents
3x 4mm scale wall lamps with 200mm connection wires
3x Resistor boards – suitable for connection to regulated DC power 6-12V
Installation Advice
Drill the mounting hole using a 2mm drill. Carefully thread the fine wires into the hole, then insert the lamp mounting tube.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
Power supply
Any regulated DC power supply between 6 and 15 volts will be suitable. (To save you any additional cost, you may find one in your bottom drawer, for example an unused mobile phone charger or any similar power supply).
More DCC concepts products
Gas Wall lamps - black - 4mm scale - DCC concepts
€ 25,25
Gas Wall lamps - black - 4mm scale - DCC concepts
Pack Contents
2x 4mm scale wall lamps with 200mm connection wires
2x Resistor boards – suitable for connection to regulated DC power 6-12V
Installation Advice
Using a very small drill, drill the building wall to allow insertion of the fine wires. Use glue to fix the lamp to the building.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
Power supply
Any regulated DC power supply between 6 and 15 volts will be suitable. (To save you any additional cost, you may find one in your bottom drawer, for example an unused mobile phone charger or any similar power supply).
More DCC concepts products
Pack Contents
2x 4mm scale wall lamps with 200mm connection wires
2x Resistor boards – suitable for connection to regulated DC power 6-12V
Installation Advice
Using a very small drill, drill the building wall to allow insertion of the fine wires. Use glue to fix the lamp to the building.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
Power supply
Any regulated DC power supply between 6 and 15 volts will be suitable. (To save you any additional cost, you may find one in your bottom drawer, for example an unused mobile phone charger or any similar power supply).
More DCC concepts products
Swan-Neck street/platform lamps - black - 4mm scale - DCC concepts
€ 37,70
Swan-Neck street/platform lamps - black - 4mm scale - DCC concepts
Pack Contents
6x 4mm scale street/platform lamps with 200mm connection wires
2x 4mm scale wall lamps with 200mm connection wires
8x Resistor boards – suitable for connection to regulated DC power 6-12V
Installation Advice
Drill the mounting hole using a 2mm drill. Carefully thread the fine wires into the hole, then insert the lamp mounting tube.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
Power supply
Any regulated DC power supply between 6 and 15 volts will be suitable. (To save you any additional cost, you may find one in your bottom drawer, for example an unused mobile phone charger or any similar power supply).
More DCC concepts products
Pack Contents
6x 4mm scale street/platform lamps with 200mm connection wires
2x 4mm scale wall lamps with 200mm connection wires
8x Resistor boards – suitable for connection to regulated DC power 6-12V
Installation Advice
Drill the mounting hole using a 2mm drill. Carefully thread the fine wires into the hole, then insert the lamp mounting tube.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
Power supply
Any regulated DC power supply between 6 and 15 volts will be suitable. (To save you any additional cost, you may find one in your bottom drawer, for example an unused mobile phone charger or any similar power supply).
More DCC concepts products
Swan-Neck Wall lamps - black - 4mm scale - DCC concepts
€ 25,25
Swan-Neck Wall lamps - black - 4mm scale - DCC concepts
Pack Contents
2x 4mm scale wall lamps with 200mm connection wires
2x Resistor boards – suitable for connection to regulated DC power 6-12V
Installation Advice
Using a very small drill, drill the building wall to allow insertion of the fine wires. Use glue to fix the lamp to the building.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
Power supply
Any regulated DC power supply between 6 and 15 volts will be suitable. (To save you any additional cost, you may find one in your bottom drawer, for example an unused mobile phone charger or any similar power supply).
More DCC concepts products
Pack Contents
2x 4mm scale wall lamps with 200mm connection wires
2x Resistor boards – suitable for connection to regulated DC power 6-12V
Installation Advice
Using a very small drill, drill the building wall to allow insertion of the fine wires. Use glue to fix the lamp to the building.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
Power supply
Any regulated DC power supply between 6 and 15 volts will be suitable. (To save you any additional cost, you may find one in your bottom drawer, for example an unused mobile phone charger or any similar power supply).
More DCC concepts products
MPD loco storage and servicing cradle - 460mm - DCC concepts
€ 74,95
MPD loco storage and servicing cradle - 460mm - DCC concepts
Drive on/off loco storage that also functions as a service cradle.
The MPD loco storage is available in 3 lengths: 360, 460 and 560 mm.
More DCC concepts products
Drive on/off loco storage that also functions as a service cradle.
The MPD loco storage is available in 3 lengths: 360, 460 and 560 mm.
More DCC concepts products
MPD loco storage and servicing cradle - 560mm - DCC concepts
€ 87,45
Locomotief opbergdoos - 560mm - DCC concepts
Deze opbergdoos voor locomotieven heeft de mogelijkheid om locomotieven rechtstreeks uit de doos te laten rijden.
Tijdens transport zijn de locomotieven beschermd door de stevige doos.
De doos is tevens te gebruiken om onderhoud aan een locomotief te doen.
De locomotief opbergdoos is beschikbaar in 3 lengten: 360, 460 en 560mm.
Meer producten van DCC concepts
Deze opbergdoos voor locomotieven heeft de mogelijkheid om locomotieven rechtstreeks uit de doos te laten rijden.
Tijdens transport zijn de locomotieven beschermd door de stevige doos.
De doos is tevens te gebruiken om onderhoud aan een locomotief te doen.
De locomotief opbergdoos is beschikbaar in 3 lengten: 360, 460 en 560mm.
Meer producten van DCC concepts
Short Crank Pack – 6 cranks and accessories - DCC concepts - working point rodding
€ 21,25
A pack of six low (3.75mm post) brass point rodding cranks plus fixing pins etc.
Manual
More DCCconcepts products
Locomotive servicing cradle - 240mm - DCC concepts
€ 19,95
Locomotive servicing cradle - 240mm - DCC concepts
Perfect for maintaing your OO / HO/ EM or P4 locomotives.
The locomotive servicing cradle is available in 4 lengths: 240, 340, 440 en 540mm.
More DCC concepts products
Perfect for maintaing your OO / HO/ EM or P4 locomotives.
The locomotive servicing cradle is available in 4 lengths: 240, 340, 440 en 540mm.
More DCC concepts products
Locomotive servicing cradle - 340mm - DCC concepts
€ 21,25
Locomotive servicing cradle - 340mm - DCC concepts
Perfect for maintaing your OO / HO/ EM or P4 locomotives.
The locomotive servicing cradle is available in 4 lengths: 240, 340, 440 en 540mm.
More DCC concepts products
Perfect for maintaing your OO / HO/ EM or P4 locomotives.
The locomotive servicing cradle is available in 4 lengths: 240, 340, 440 en 540mm.
More DCC concepts products
Locomotive servicing cradle - 440mm - DCC concepts
€ 22,45
Locomotive servicing cradle - 440mm - DCC concepts
Perfect for maintaing your OO / HO/ EM or P4 locomotives.
The locomotive servicing cradle is available in 4 lengths: 240, 340, 440 en 540mm.
More DCC concepts products
Perfect for maintaing your OO / HO/ EM or P4 locomotives.
The locomotive servicing cradle is available in 4 lengths: 240, 340, 440 en 540mm.
More DCC concepts products
10 pack Trackbed sheets 3mm - DCC concepts
€ 22,95
10 pack Trackbed sheets 3mm thick.
A box of 10 sheets of high quality trackbed (3mm thick).
Each sheet is 600 x 300 mm.
Made from very long life EVA, closed cell foam trackbed.
The pieces are flat (not on a roll).
Easy to cut with a snap off knife.
More DCC concepts products
6 pack Track Bed sheets 5mm - DCC concepts
€ 22,95
6 pack Trackbed sheets 5mm thick.
A box of 6 sheets of high quality trackbed (5mm thick).
Each sheet is 600 x 300 mm.
Made from very long life EVA, closed cell foam trackbed.
The pieces are flat (not on a roll).
Easy to cut with a snap off knife.
More DCC concepts products