There are no products in your shopping cart yet.
buildings OO
1 / 2
Loading...
Model kit OO/HO: Low relief Pub and shops - Metcalfe - PO205
€ 17,95
A pub and two shop frontages with lots of little detailing and variety of signs and interiors.
Each building is independent and can be placed alongside any other low relief building.
This gives you the opportunity to create a unique street on your layout.
Area (width x depth): 265 x 35. Height: 180 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief Cinema and shops - Metcalfe - PO206
€ 14,45
A low relief cinema incorporating two lock-up shops.
A period cinema with a variety of signs for different eras and uses.
Ideal for backdrops where space is limited.
Area (width x depth): 195 x 34. Height: 146 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: platform - red brick - Metcalfe - PO216
€ 18,60
A versatile platform kit that can be built to virually any shape.
This kit will make up to 8 feet of platform at a width of around 2 inches.
Or you can build an island platform 5 ft long x 3 inches wide.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Parish church - Metcalfe - PO226
€ 22,95
A village or town is complete with a church.
The kit comes with clear glazing and fine laser cut recessed stone windows.
The gates in the Lich gate are laser cut.
Area: 245 x 150mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Coaching inn - Metcalfe - PO228
€ 16,80
This is a traditional old English road side halt with an attractive frontage and an arched passageway leading throuh to a small yard at the rear.
Originally built to serve the horse drawn coaches of the 18th and 19th centuries on their long journeys from town to town. The Inn will also have served the motor coaches of the 20th century taking day trippers from towns and cities to the sea side.
Area: 160 x 152.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Goods shed - Metcalfe - PO332
€ 18,75
A small country goods depot. Detailed inside and out.
Kit also includes weighbridge office.
Area: 237 x 110 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Signal Box - Metcalfe - PO233
€ 13,75
Although based on a standard L.N.W.R. style signal box this kit will suit most layouts.
The kit also includes a lineside shed and a lamp hut.
An attractive kit with clear plastic windows and fine scale plastic steps..
Area: 96 x 50 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: platform - stone - Metcalfe - PO235
€ 18,60
A versatile platform kit that can be built to virually any shape.
This kit will make up to 8 feet of platform at a width of around 2 inches.
Or you can build an island platform 5 ft long x 3 inches wide.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: footbridge - Metcalfe - PO236
€ 16,80
An attractive card kit with clear plastic windows and moulded plastic steps.
The footbridge span is 174mm but it can be cut down easily for a narrower span if required.
Adding on extra kits to extend the footbridge is easily done.
The kit also incorporates optional base steps enabling the bridge to be used from trackbed or platform height.
Area: (width x depth): 230 x 105mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: country station - Metcalfe - PO237
€ 22,80
Based on the standard designs used by the Cheshire Lines Railway and the Manchester, Sheffield and Lincolnshire Railway Company.
A beautiful red brick station kit with extra waiting rooms and canopy for the opposite platform.
Area: 295 x 91 mm.
Shelter: 192 x 60 mm.
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Double track brick viaduct - Metcalfe - PO240
€ 22,80
A strong and sturdy two track viaduct.
The structure is easliy customised to make shorter (height or length) or longer with extra kits.
Height to trackbed: 132 mm.
Trackbed width: 100mm.
Overall length: 735 mm (incl. end wall sections).
Each arch width: 102mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Double track stone viaduct - Metcalfe - PO241
€ 22,80
A strong and sturdy two track viaduct.
The structure is easliy customised to make shorter (height or length) or longer with extra kits.
Height to trackbed: 132 mm.
Trackbed width: 100mm.
Overall length: 735 mm (incl. end wall sections).
Each arch width: 102mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: double track tunnel entrances - Metcalfe - PO242
€ 15,00
A pair of sturdy double track tunnel entrances complete with inner walls.
Width of tunnel entrance: 118mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: single track tunnel entrances - Metcalfe - PO243
€ 13,80
A pair of sturdy single track tunnel entrances complete with inner walls.
Width of tunnel entrance: 70mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: retaining wall - brick - Metcalfe - PO244
€ 18,75
A realistic and sturdy looking wall with recessed lower sections, ideal for embankments and cuttings.
Size: 545 x 105mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: retaining wall - stone - Metcalfe - PO245
€ 18,75
A realistic and sturdy looking wall with recessed lower sections, ideal for embankments and cuttings.
Size: 545 x 105mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: railway bridge - Metcalfe - PO246
€ 19,95
Beautifully detailed bridge with the option to make the top deck, single or double track.
Overall size incl. wing walls 435 x 130 mm.
Arch 120mm wide.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: railway bridge - stone - Metcalfe - PO247
€ 19,95
Beautifully detailed bridge with the option to make the top deck, single or double track.
Overall size incl. wing walls 435 x 130 mm.
Arch 120mm wide.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: tapered retaining walls - brick - Metcalfe - PO248
€ 18,75
A pair of realistic sloping walls with recessed sections taking you from a low level up to a higher level of the 'normal' retaining walls or railway bridge.
Size: 450mm long (each).
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: tapered retaining walls - stone - Metcalfe - PO249
€ 18,75
A pair of realistic sloping walls with recessed sections taking you from a low level up to a higher level of the 'normal' retaining walls or railway bridge.
Size: 450mm long (each).
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Manor Farm house - Metcalfe - PO250
€ 14,45
A 17th century stone built farm house and farm workers cottage..
Area: 126 x 125.
Cottage: 86 x 101 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Manor farm barn - Metcalfe - PO251
€ 13,95
A traditional stone barn and tractor shed.
Designed to stand along the Manor Farm House kit.
Area: 126 x 130.
Tractor shed: 145 x 70 mm
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Manor farm buildings - Metcalfe - PO252
€ 15,75
A modern farm building, consisting of: Cow Shed/Barn, Silo Pit and a couple of hen huts.
Area: 205 x 145.
Large hen hut: 130 x 64 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Village school - Metcalfe - PO253
€ 14,45
A small country school with bike shed and out building.
Also makes a great village hall or library.
Area: 142 x 152.
Outbuilding: 130 x 40mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Village shop and cafe - Metcalfe - PO254
€ 16,95
A beautifully detailed little rural building.
Area: 193 x 124.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Workers cottages - Metcalfe - PO255
€ 17,95
Based on the railway workers cottages along the Settle to Carlisle Railway, these beautiful buildings suit many uses whether it be railway, rural or urban.
Area: 140 x 110.
Shed: 60 x 48mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO - Grange house - Metcalfe - PO257
€ 15,75
A beautifully proportioned country home.
Ideal for village style scenes.
Size main building: 155 x 120 (L x W)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit OO - Gardeners cottage - Metcalfe - PO258
€ 13,45
A gardeners cottage which would fit in any village. With laser cut detailing. Perfect for a rural scene.
Kit includes three optional extensions to customize the main cottage.
Size main building: 90 x 71 x 99 mm (L x W x H)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit OO - Crofters cottage - Metcalfe - PO259
€ 11,95
A tiny cottage with optional barn conversion which would fit in any village. Perfect for a rural scene.
Kit includes two optional extensions to customize the main cottage.
Kits can be added to each other to form a row of cottages.
Size main building: 110 x 60 x 100 mm (L x W x H)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit OO - Town end cottage - Metcalfe - PO267
€ 17,95
A tipical mediaval cottage based on the village of Lacock, Wiltshire famed for its appearances in many TV shows and films..
Size building: 186 x 122 mm (L x W)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief bank and shop - Metcalfe - PO271
€ 16,25
A detailed high street bank with accompanying shop next door.
Each with a variety of signs and interiors for different uses and periods.
Ideal for backdrops where space is limited.
Bank: (width x depth): 172 x 36mm. Height: 167 mm.
Shop: (width x depth): 83 x 26 mm. Height: 161 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief department store - Metcalfe - PO279
€ 19,25
A finely detailed shop with added laser cut detailing.
Can be easily extended with extra kits to form double ended building.
Could also be placed back to back to make a stand alone building.
Ideal for backdrops where space is limited.
Area: (width x depth): 180 x 36mm. Height: 182 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Service station - Metcalfe - PO281
€ 19,25
A small town or country garage building with showroom and service bays, petrol pumps and canopy.
Area: 171 x 146.
Canopy: 79 x 133 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Warehouse - Metcalfe - PO282
€ 18,75
A large industrial warehouse / factory building that can be constructed as either a low relief building or stand alone structure.
Area stand alone: 117 x 171.
Low relief (2x) 117 x 60 mm and bridge 112 x 20 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Small factory - Metcalfe - PO283
€ 18,75
A single storey factory unit with northlight roof windows and rail/road loading bay plus three storey workshop building.
Two buildings with a variety of uses, that can be either stood alone or grouped together.
Area single storey: 225 x 94 (incl. platform)
Three storey: 75 x 94mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Factory entrance and boiler house - Metcalfe - PO284
€ 18,75
The grand entrance and engine house. Just what every factory needs.
Combined with the other industrial building kits from Metcalfe one can create a complete industry.
Area entrance building: 180 x 65 mm
Boiler house: 125 x 70 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Modern Industrial Unit - Metcalfe - PO285
€ 16,25
A multi use, modern industrial building that offers a wide range of uses.
Can be built as a stand alone or combined with multiple kits to create large industrial parks.
A large selection of alternative signs are included with the kit.
Area: 141 x 121 mm.
Height: 77 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Ramshackle Workshop - Metcalfe - PO286
€ 17,95
Model kit OO: Ramshackle Workshop - Metcalfe - PO286
This little beauty is very much like the small workshops you will find all over the place, usually hidden away down back alleyways and side streets. But still a very important part of the workaday scene.
Area: 158 x 84 mm. Height: 138 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
This little beauty is very much like the small workshops you will find all over the place, usually hidden away down back alleyways and side streets. But still a very important part of the workaday scene.
Area: 158 x 84 mm. Height: 138 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Old Factory - Metcalfe - PO287
€ 21,75
Model kit OO: Old Factory - Metcalfe - PO287
This beautiful Old Factory lends itself to many uses. Comes with a variety of signs.
Area: 223 x 117 x 152 mm.
or 373 x 73 x 152 mm (half relief)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
This beautiful Old Factory lends itself to many uses. Comes with a variety of signs.
Area: 223 x 117 x 152 mm.
or 373 x 73 x 152 mm (half relief)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Brewery - Metcalfe - PO288
€ 22,80
Model kit OO: Brewery - Metcalfe - PO288
This Factory Building is suitable as a brewery. Fits alongside Old Factory (PO287) and Ramshackle Workshop (PO286).
Dimensions: 118 x 114 x 270 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
This Factory Building is suitable as a brewery. Fits alongside Old Factory (PO287) and Ramshackle Workshop (PO286).
Dimensions: 118 x 114 x 270 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Firestation - Metcalfe - PO289
€ 23,45
A modern style fire station with a double fire engine garage, side office with an upstairs break room and a fire tower at the rear. A sturdy building that looks good from every angle. A great addition to any village or town model scene.
Area: (width x depth): 190 x 200mm. Height: 146 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Grimy Old Mill - Metcalfe - PO290
€ 29,95
Model kit OO: Grimy Old Mill - Metcalfe - PO290
This beautiful Old Factory lends itself to many uses.
Area: 227 x 100 mm.
or 454 x 50 mm (half relief)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
This beautiful Old Factory lends itself to many uses.
Area: 227 x 100 mm.
or 454 x 50 mm (half relief)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit OO - Castle Gatehouse - Metcalfe - PO291
€ 23,95
a beautiful gatehouse which are still seen today in historic towns and cities.
Size building: 177 x 97 (L x W)
Maximum height: 169 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit OO - Watch Tower - Metcalfe - PO292
€ 9,00
To use between curtain walls or as a a stand alone folly.
Size main building: 42 x 42 x 124 mm (L x W x H)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit OO - Curtain walls - Metcalfe - PO293
€ 15,00
These wall sections are idea to build your castle or fortify your model town.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit OO - Castle Hall - Metcalfe - PO294
€ 23,45
The beating heart of a castle.
Size main building: 110 x 60 x 100 mm (L x W x H)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Castle Stonework builders sheets - Metcalfe - PO295
€ 7,20
8 sheets of card printed Castle Stonework.
Ideal for custom building of extra bits to your castle or medieval town.
Pack contains:
4 sheets x .23mm thick
4 sheets x .50mm thick
2 sheets of castle paving .5mm thick
1 sheet of laser cut topping stones
Please note colours may slightly vary.
More Metcalfe products
Model Kit OO: Castle Wall Bridge - Metcalfe - PO296
€ 13,25
An opening in the castle wall allows a road or railroad passing through the Castle grounds.
Area: 238 x 23 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 238 x 23 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Terraced houses red brick - Metcalfe - PO300
€ 21,00
New redesigned pair of beautiful houses complete with back yards and paving slabs in the front.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 160.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Terraced houses stone - Metcalfe - PO301
€ 21,00
New redesigned pair of beautiful houses complete with back yards and paving slabs in the front.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 160.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief - Terraced houses red brick - Metcalfe - PO302
€ 19,25
New redesigned 2 pair of beautiful low relief houses complete with paving slabs in the front.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 60.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief - Terraced houses stone - Metcalfe - PO303
€ 19,25
New redesigned 2 pair of beautiful low relief houses complete with paving slabs in the front.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 60.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief - Terraced houses red brick - backs - Metcalfe - PO304
€ 22,85
New redesigned 2 pair of beautiful low relief houses backs complete with back yards.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 106 (one pair).
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief - Terraced houses stone - backs - Metcalfe - PO305
€ 22,85
New redesigned 2 pair of beautiful low relief houses backs complete with back yards.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 106 (one pair).
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief - Shop fronts - brick - Metcalfe - PO306
€ 22,85
New redesigned 2 pair of beautiful low relief shop fronts.
They come as 2 blocks, 1 with 2 shop fronts, the 2nd with a large shop front and an office entrance.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 106 (one pair).
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief - Shop fronts - stone - Metcalfe - PO307
€ 22,85
New redesigned 2 pair of beautiful low relief shop fronts.
They come as 2 blocks, 1 with 2 shop fronts, the 2nd with a large shop front and an office entrance.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 106 (one pair).
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Corner shop or Pub - brick - Metcalfe - PO308
€ 22,85
A dual purpose kit that can be built as either a Corner Shop or a Pub. ( Kit contains 1 building, with the options of 2 frontages)
Designed to be built in a right handed or left handed style to fit either end or our PO300 series of Terraced Houses. Comes with a variety of signs and window interiors.
Create fabulous street scenes using Terraced Houses, or mix in with the Shop Fronts & House Backs.
Dimensions: 137 x 97 x 130mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Corner shop or Pub - stone - Metcalfe - PO309
€ 22,85
A dual purpose kit that can be built as either a Corner Shop or a Pub. ( Kit contains 1 building, with the options of 2 frontages)
Designed to be built in a right handed or left handed style to fit either end or our PO300 series of Terraced Houses. Comes with a variety of signs and window interiors.
Create fabulous street scenes using Terraced Houses, or mix in with the Shop Fronts & House Backs.
Dimensions: 137 x 97 x 130mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: double track Engine shed - red brick - Metcalfe - PO313
€ 29,95
A sturdy double track engine shed with lots of detailing.
With laser cut roof trusses that make the interior detailing more authentic, and can be clearly seen through the roof windows.
Includes a separate workshop building that can be attached to the shed at any position or used free standing.
With lots of details: relief window lintels and sills. Beautifully printed red and blue brick.
Area: 323 x 140 mm
Workshop: 100 x 65mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Little Cardleywick Station - Metcalfe - PO315
€ 18,60
A Beautiful little station kit “Little Cardleywick Station” part of our fictitious village and the start of a new range. A space saving building with all the features of a large station but takes up very little space.
Area: 165 x 70 mm.
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits