There are no products in your shopping cart yet.
industrial buildings
Industry is one of the reasons a town or city has a railway. Industrial buildings can be used as a eye catcher on your model railway layout or diorama. They also can be used to hide an entrance to the layout or be part of the back scene.
Loading...
Model kit OO/HO: Warehouse - Metcalfe - PO282
€ 18,75
A large industrial warehouse / factory building that can be constructed as either a low relief building or stand alone structure.
Area stand alone: 117 x 171.
Low relief (2x) 117 x 60 mm and bridge 112 x 20 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Small factory - Metcalfe - PO283
€ 18,75
A single storey factory unit with northlight roof windows and rail/road loading bay plus three storey workshop building.
Two buildings with a variety of uses, that can be either stood alone or grouped together.
Area single storey: 225 x 94 (incl. platform)
Three storey: 75 x 94mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Factory entrance and boiler house - Metcalfe - PO284
€ 18,75
The grand entrance and engine house. Just what every factory needs.
Combined with the other industrial building kits from Metcalfe one can create a complete industry.
Area entrance building: 180 x 65 mm
Boiler house: 125 x 70 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Modern Industrial Unit - Metcalfe - PO285
€ 16,25
A multi use, modern industrial building that offers a wide range of uses.
Can be built as a stand alone or combined with multiple kits to create large industrial parks.
A large selection of alternative signs are included with the kit.
Area: 141 x 121 mm.
Height: 77 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Ramshackle Workshop - Metcalfe - PO286
€ 17,95
Model kit OO: Ramshackle Workshop - Metcalfe - PO286
This little beauty is very much like the small workshops you will find all over the place, usually hidden away down back alleyways and side streets. But still a very important part of the workaday scene.
Area: 158 x 84 mm. Height: 138 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
This little beauty is very much like the small workshops you will find all over the place, usually hidden away down back alleyways and side streets. But still a very important part of the workaday scene.
Area: 158 x 84 mm. Height: 138 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Old Factory - Metcalfe - PO287
€ 21,75
Model kit OO: Old Factory - Metcalfe - PO287
This beautiful Old Factory lends itself to many uses. Comes with a variety of signs.
Area: 223 x 117 x 152 mm.
or 373 x 73 x 152 mm (half relief)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
This beautiful Old Factory lends itself to many uses. Comes with a variety of signs.
Area: 223 x 117 x 152 mm.
or 373 x 73 x 152 mm (half relief)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Brewery - Metcalfe - PO288
€ 22,80
Model kit OO: Brewery - Metcalfe - PO288
This Factory Building is suitable as a brewery. Fits alongside Old Factory (PO287) and Ramshackle Workshop (PO286).
Dimensions: 118 x 114 x 270 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
This Factory Building is suitable as a brewery. Fits alongside Old Factory (PO287) and Ramshackle Workshop (PO286).
Dimensions: 118 x 114 x 270 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Firestation - Metcalfe - PO289
€ 23,45
A modern style fire station with a double fire engine garage, side office with an upstairs break room and a fire tower at the rear. A sturdy building that looks good from every angle. A great addition to any village or town model scene.
Area: (width x depth): 190 x 200mm. Height: 146 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Grimy Old Mill - Metcalfe - PO290
€ 29,95
Model kit OO: Grimy Old Mill - Metcalfe - PO290
This beautiful Old Factory lends itself to many uses.
Area: 227 x 100 mm.
or 454 x 50 mm (half relief)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
This beautiful Old Factory lends itself to many uses.
Area: 227 x 100 mm.
or 454 x 50 mm (half relief)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Settle Carlisle Railway Goods shed - Metcalfe - PO336
€ 29,95
A sturdy goods depot. Designed to stand along The Settle and Carlisle range of buildings.
A beautifully detailed card construction kit with die and laser cut components.
Shed: 268 x 132 mm.
Office: 82 x 56mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Railway Arches - Metcalfe - PO380
€ 19,25
8 half relief shop/garage facades that fill the railway arches on our existing viaduct kits – PO240 and PO241
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Old Mill Chimney Stack - Metcalfe - PO401
€ 10,80
Model kit OO: Old Mill Chimney Stack - Metcalfe - PO401
This Chimney Stackfits alongside Old Factory (PO287), Ramshackle Workshop (PO286) and Brewery (PO288).
Dimensions: 118 x 114 x 270 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
This Chimney Stackfits alongside Old Factory (PO287), Ramshackle Workshop (PO286) and Brewery (PO288).
Dimensions: 118 x 114 x 270 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits