• info

    You have reached the minimum number

    Shopping cart (0)

    There are no products in your shopping cart yet.

    industrial buildings

    Industry is one of the reasons a town or city has a railway. Industrial buildings can be used as a eye catcher on your model railway layout or diorama. They also can be used to hide an entrance to the layout or be part of the back scene.




    Loading...
    Model kit N: Warehouse - Metcalfe - PN182

    Quick view

    Model kit N: Warehouse - Metcalfe - PN182

    Model kit N: Warehouse - Metcalfe - PN182

    € 14,45

    A large brick built industrial warehouse, with lots of fine detailing.
    Can be built as stand alone or low relief.

    Warehouse (stand alone) 118 x 70 x 139h mm.
    Warehouse (low relief) 62 x 70 x 139h mm.
    Tower: 28 x 28 x 169h mm
    Bridge: 78 x 14 mm
    Entrance: 45 x 24 mm

    To build the kit you need following:
    - a modellers knife
    - a pair of scissors
    - a steel ruler
    - glue (for example: UHU solvent free all purpose)
    - a cutting surface
    - fine point tweezers
    - water colour paints and a fine brush

    Metcalfe kits are printed in full colour on to 1mm thick card.
    Ready cut and creased.
    Fully illustrated step by step instructions.

    More Metcalfe kits

    Model kit N: Small factory - Metcalfe - PN183

    Quick view

    Model kit N: Small factory - Metcalfe - PN183

    Model kit N: Small factory - Metcalfe - PN183

    € 14,45

    A pair of industrial buildings with detailed features and loading platforms.
    Great for sidings.

    Area: 182 x 70 mm.

    To build the kit you need following:
    - a modellers knife
    - a pair of scissors
    - a steel ruler
    - glue (for example: UHU solvent free all purpose)
    - a cutting surface
    - fine point tweezers
    - water colour paints and a fine brush

    Metcalfe kits are printed in full colour on to 1mm thick card.
    Ready cut and creased.
    Fully illustrated step by step instructions.

    More Metcalfe kits

    Model kit N: Boiler house and factory entrance - Metcalfe - PN184

    Model kit N: Boiler house and factory entrance - Metcalfe - PN184

    € 16,95

    The grand entrance and the power house. A vital part to any industrial project.
    Includes engine house and mill chimney.

    Factory entrance building: 137 x 50 x 157h mm.
    Boiler house and engine room: 104 x 70 x 71h mm.
    Mill chimney: 21 x 21 x 212 h mm.

    To build the kit you need following:
    - a modellers knife
    - a pair of scissors
    - a steel ruler
    - glue (for example: UHU solvent free all purpose)
    - a cutting surface
    - fine point tweezers
    - water colour paints and a fine brush

    Metcalfe kits are printed in full colour on to 1mm thick card.
    Ready cut and creased.
    Fully illustrated step by step instructions.

    More Metcalfe kits

    Model kit N: Ramshackle Workshop - Metcalfe - PN186

    Quick view

    Model kit N: Ramshackle Workshop - Metcalfe - PN186

    Model kit N: Ramshackle Workshop - Metcalfe - PN186

    € 14,45

    Model kit N: Ramshackle Workshop - Metcalfe - PN186
    Area: 100 x 62 mm. Height: 65 mm.

    To build the kit you need following:
    - a modellers knife
    - a pair of scissors
    - a steel ruler
    - glue (for example: UHU solvent free all purpose)
    - a cutting surface
    - fine point tweezers
    - water colour paints and a fine brush

    Metcalfe kits are printed in full colour on to 1mm thick card.
    Ready cut and creased.
    Fully illustrated step by step instructions.

    More Metcalfe kits

    Model kit N: Old Factory - Metcalfe - PN187

    Quick view

    Model kit N: Old Factory - Metcalfe - PN187

    Model kit N: Old Factory - Metcalfe - PN187

    € 16,95

    Model kit N: Old Factory - Metcalfe - PN187
    Area: 180 x 69 mm. Height: 90 mm.

    To build the kit you need following:
    - a modellers knife
    - a pair of scissors
    - a steel ruler
    - glue (for example: UHU solvent free all purpose)
    - a cutting surface
    - fine point tweezers
    - water colour paints and a fine brush

    Metcalfe kits are printed in full colour on to 1mm thick card.
    Ready cut and creased.
    Fully illustrated step by step instructions.

    More Metcalfe kits

    Model kit N: Brewery - Metcalfe - PN188

    Quick view

    Model kit N: Brewery - Metcalfe - PN188

    Model kit N: Brewery - Metcalfe - PN188

    € 15,75

    Model kit N: Brewery - Metcalfe - PN188
    Area: 69 x 63 mm. Height: 165 mm.

    To build the kit you need following:
    - a modellers knife
    - a pair of scissors
    - a steel ruler
    - glue (for example: UHU solvent free all purpose)
    - a cutting surface
    - fine point tweezers
    - water colour paints and a fine brush

    Metcalfe kits are printed in full colour on to 1mm thick card.
    Ready cut and creased.
    Fully illustrated step by step instructions.

    More Metcalfe kits

    Model kit N: Firestation - Metcalfe - PN189

    Quick view

    Model kit N: Firestation - Metcalfe - PN189

    Model kit N: Firestation - Metcalfe - PN189

    € 14,95

    A modern style fire station with a double fire engine garage, side office with an upstairs break room and a fire tower at the rear. A sturdy building that looks good from every angle. A great addition to any village or town model scene.
    Area: (width x depth): 106 x 109mm. Height: 82 mm.

    To build the kit you need following:
    - a modellers knife
    - a pair of scissors
    - a steel ruler
    - glue (for example: UHU solvent free all purpose)
    - a cutting surface
    - fine point tweezers
    - water colour paints and a fine brush

    Metcalfe kits are printed in full colour on to 1mm thick card.
    Ready cut and creased.
    Fully illustrated step by step instructions.

    More Metcalfe kits

    Model kit N: Water Wheel - Metcalfe - PN841

    Quick view

    Model kit N: Water Wheel - Metcalfe - PN841

    Model kit N: Water Wheel - Metcalfe - PN841

    € 6,75

    Model kit N: Water Wheel - Metcalfe - PN841.

    Benodigdheden om het bouwpakket te bouwen:
    - een scherp hobbymes
    - een schaar
    - een stalen liniaal
    - lijm (bijvoorbeeld UHU alleslijm zonder oplosmiddel)
    - een snijmat
    - een pincet
    - waterverf in verschillende kleuren

    Metcalfe bouwpakketten zijn gedrukt op 1mm dik karton, voorgesneden en gerild
    Inclusief uitgebreide Engelstalige bouwbeschrijving.
    Meer bouwpakketten van Metcalfe

    Model kit N: Grimy Old Mill - Metcalfe - PN990

    Quick view

    Model kit N: Grimy Old Mill - Metcalfe - PN990

    Model kit N: Grimy Old Mill - Metcalfe - PN990

    € 21,60

    Model kit N: Grimy Old Mill - Metcalfe - PN990
    Area: 135 x 58 mm. Height: 158 mm.
    Or half relief: 290 x 37mm

    To build the kit you need following:
    - a modellers knife
    - a pair of scissors
    - a steel ruler
    - glue (for example: UHU solvent free all purpose)
    - a cutting surface
    - fine point tweezers
    - water colour paints and a fine brush

    Metcalfe kits are printed in full colour on to 1mm thick card.
    Ready cut and creased.
    Fully illustrated step by step instructions.

    More Metcalfe kits

    Model kit N: Old Mill Chimney Stack - Metcalfe - PN991

    Quick view

    Model kit N: Old Mill Chimney Stack - Metcalfe - PN991

    Model kit N: Old Mill Chimney Stack - Metcalfe - PN991

    € 8,45

    Model kit N: Old Mill Chimney Stack - Metcalfe - PN991
    Area: 20 x 20 mm. Height: 188 mm.

    To build the kit you need following:
    - a modellers knife
    - a pair of scissors
    - a steel ruler
    - glue (for example: UHU solvent free all purpose)
    - a cutting surface
    - fine point tweezers
    - water colour paints and a fine brush

    Metcalfe kits are printed in full colour on to 1mm thick card.
    Ready cut and creased.
    Fully illustrated step by step instructions.

    More Metcalfe kits

    Model kit N: Industrial Overbridge - Metcalfe - PN992

    Model kit N: Industrial Overbridge - Metcalfe - PN992

    € 8,95

    Model kit N: Industrial Overbridge - Metcalfe - PN992
    Maximum length: 94mm.

    To build the kit you need following:
    - a modellers knife
    - a pair of scissors
    - a steel ruler
    - glue (for example: UHU solvent free all purpose)
    - a cutting surface
    - fine point tweezers
    - water colour paints and a fine brush

    Metcalfe kits are printed in full colour on to 1mm thick card.
    Ready cut and creased.
    Fully illustrated step by step instructions.

    More Metcalfe kits