• info

    You have reached the minimum number

    Shopping cart (0)

    There are no products in your shopping cart yet.

    buildings N



    Loading...
    Model kit N: Red brick terraced Houses - Metcalfe - PN103

    Quick view

    Model kit N: Red brick terraced Houses - Metcalfe - PN103

    Model kit N: Red brick terraced Houses - Metcalfe - PN103

    € 13,25

    Two sets of two terraced houses complete with back yards and outbuildings that can be easily stood together with more kits to make fantastic street scenes.
    Area: 74 x 87 mm
    New design

    To build the kit you need following:
    - a modellers knife
    - a pair of scissors
    - a steel ruler
    - glue (for example: UHU solvent free all purpose)
    - a cutting surface
    - fine point tweezers
    - water colour paints and a fine brush

    Metcalfe kits are printed in full colour on to 1mm thick card.
    Ready cut and creased.
    Fully illustrated step by step instructions.

    More Metcalfe kits

    Model kit N: stone built terraced Houses - Metcalfe - PN104

    Quick view

    Model kit N: stone built terraced Houses - Metcalfe - PN104

    Model kit N: stone built terraced Houses - Metcalfe - PN104

    € 13,25

    Two sets of two stone built terraced houses complete with back yards and outbuildings that can be easily stood together with more kits to make fantastic street scenes.
    Area: 74 x 94 mm
    New design

    To build the kit you need following:
    - a modellers knife
    - a pair of scissors
    - a steel ruler
    - glue (for example: UHU solvent free all purpose)
    - a cutting surface
    - fine point tweezers
    - water colour paints and a fine brush

    Metcalfe kits are printed in full colour on to 1mm thick card.
    Ready cut and creased.
    Fully illustrated step by step instructions.

    More Metcalfe kits

    Model kit N:  red brick platform - Metcalfe - PN110

    Quick view

    Model kit N:  red brick platform - Metcalfe - PN110

    Model kit N: red brick platform - Metcalfe - PN110

    € 14,45

    A versatile platform kit that can be built to virtually any shape.
    You can build straight, curved, Island or Bay platforms.
    The kit comes with four sheets of tarmac for the top.

    The kit will make up to 8 feet of platform at a width of around 2 inches.
    Or you can build an island platform 5ft long x 3 inches wide.

    To build the kit you need following:
    - a modellers knife
    - a pair of scissors
    - a steel ruler
    - glue (for example: UHU solvent free all purpose)
    - a cutting surface
    - fine point tweezers
    - water colour paints and a fine brush

    Metcalfe kits are printed in full colour on to 1mm thick card.
    Ready cut and creased.
    Fully illustrated step by step instructions.

    More Metcalfe kits

    Model kit N:  corner shop and pub red brick - Metcalfe - PN116

    Quick view

    Model kit N:  corner shop and pub red brick - Metcalfe - PN116

    Model kit N: corner shop and pub red brick - Metcalfe - PN116

    € 14,45

    Two terraced corner buildings.
    Can be made into shops opr pub and shop.
    Comes with a variety of signs and interior window dressings for multiple use.
    Area: 94 x 94 mm (each)
    New design

    To build the kit you need following:
    - a modellers knife
    - a pair of scissors
    - a steel ruler
    - glue (for example: UHU solvent free all purpose)
    - a cutting surface
    - fine point tweezers
    - water colour paints and a fine brush

    Metcalfe kits are printed in full colour on to 1mm thick card.
    Ready cut and creased.
    Fully illustrated step by step instructions.

    More Metcalfe kits

    Model kit N:  corner shop and pub stone built - Metcalfe - PN117

    Quick view

    Model kit N:  corner shop and pub stone built - Metcalfe - PN117

    Model kit N: corner shop and pub stone built - Metcalfe - PN117

    € 14,45

    Two terraced corner stone built buildings.
    Can be made into shops opr pub and shop.
    Comes with a variety of signs and interior window dressings for multiple use.
    Area: 94 x 94 mm (each)
    New design

    To build the kit you need following:
    - a modellers knife
    - a pair of scissors
    - a steel ruler
    - glue (for example: UHU solvent free all purpose)
    - a cutting surface
    - fine point tweezers
    - water colour paints and a fine brush

    Metcalfe kits are printed in full colour on to 1mm thick card.
    Ready cut and creased.
    Fully illustrated step by step instructions.

    More Metcalfe kits

    Model kit N: Coaching Inn - Metcalfe - PN128

    Quick view

    Model kit N: Coaching Inn - Metcalfe - PN128

    Model kit N: Coaching Inn - Metcalfe - PN128

    € 13,25

    A beautiful building that will sit comfortably on any layout, town or country.
    Looks good from any angle with a rear enclosed courtyard.
    Kit includes laser cut window frames and a choice of signs.

    Area: 105 x 101 mm.

    To build the kit you need following:
    - a modellers knife
    - a pair of scissors
    - a steel ruler
    - glue (for example: UHU solvent free all purpose)
    - a cutting surface
    - fine point tweezers
    - water colour paints and a fine brush

    Metcalfe kits are printed in full colour on to 1mm thick card.
    Ready cut and creased.
    Fully illustrated step by step instructions.

    More Metcalfe kits

    Model kit N:  Signal Box set- Metcalfe - PN133

    Quick view

    Model kit N:  Signal Box set- Metcalfe - PN133

    Model kit N: Signal Box set- Metcalfe - PN133

    € 11,95

    This kit contains a large box suitable for mainline working and a small box ideal for crossings or goods yards. The pack also contains a lamp hut and a platelayers hut.

    Large box: 100 x 26 mm (including steps).
    Small box: 39 x 24mm.
    Platelayers hut: 36 x 17mm.
    Lamp hut: 19 x 13mm.

    To build the kit you need following:
    - a modellers knife
    - a pair of scissors
    - a steel ruler
    - glue (for example: UHU solvent free all purpose)
    - a cutting surface
    - fine point tweezers
    - water colour paints and a fine brush

    Metcalfe kits are printed in full colour on to 1mm thick card.
    Ready cut and creased.
    Fully illustrated step by step instructions.

    More Metcalfe kits

    Model kit N:  stone platform - Metcalfe - PN135

    Quick view

    Model kit N:  stone platform - Metcalfe - PN135

    Model kit N: stone platform - Metcalfe - PN135

    € 14,45

    A versatile platform kit that can be built to virtually any shape.
    You can build straight, curved, Island or Bay platforms.
    The kit comes with four sheets of tarmac for the top.

    The kit will make up to 7 feet of platform at a width of around 2 inches.

    To build the kit you need following:
    - a modellers knife
    - a pair of scissors
    - a steel ruler
    - glue (for example: UHU solvent free all purpose)
    - a cutting surface
    - fine point tweezers
    - water colour paints and a fine brush

    Metcalfe kits are printed in full colour on to 1mm thick card.
    Ready cut and creased.
    Fully illustrated step by step instructions.

    More Metcalfe kits

    Model kit N: footbridge - Metcalfe - PN136

    Quick view

    Model kit N: footbridge - Metcalfe - PN136

    Model kit N: footbridge - Metcalfe - PN136

    € 14,45

    An intricately designed covered footbridge for use with any type of railways station.
    More kits can easily be added to extend the bridge over more tracks.
    The optional base steps can be used to adjust the height allowing the bridge to stand on base board or platforms.

    Size: 124 x 70 mm.

    To build the kit you need following:
    - a modellers knife
    - a pair of scissors
    - a steel ruler
    - glue (for example: UHU solvent free all purpose)
    - a cutting surface
    - fine point tweezers
    - water colour paints and a fine brush

    Metcalfe kits are printed in full colour on to 1mm thick card.
    Ready cut and creased.
    Fully illustrated step by step instructions.

    More Metcalfe kits

    Model kit N:  Country station- Metcalfe - PN137

    Quick view

    Model kit N:  Country station- Metcalfe - PN137

    Model kit N: Country station- Metcalfe - PN137

    € 17,95

    A finely detailed set of station buildings based on designs used by many railway companies.
    Kit includes platform shelter and steps for use with platform kit PN110.
    Fine detailing with die cut and laser cut components.

    Station: 176 x 55 mm.
    Platform shelter: 110 x 40mm.

    To build the kit you need following:
    - a modellers knife
    - a pair of scissors
    - a steel ruler
    - glue (for example: UHU solvent free all purpose)
    - a cutting surface
    - fine point tweezers
    - water colour paints and a fine brush

    Metcalfe kits are printed in full colour on to 1mm thick card.
    Ready cut and creased.
    Fully illustrated step by step instructions.

    More Metcalfe kits

    Model kit N: Double track brick viaduct - Metcalfe - PN140

    Model kit N: Double track brick viaduct - Metcalfe - PN140

    € 15,75

    A sturdy and versatile structure that can be constructed as double track or it can be narrowed down to single track (twice as long).

    Length arched sections: double track: 272 mm, single track: 544mm.
    Trackbed width: double track: 58 mm, single track: 25 mm.
    Height to trackbed: 72mm.

    To build the kit you need following:
    - a modellers knife
    - a pair of scissors
    - a steel ruler
    - glue (for example: UHU solvent free all purpose)
    - a cutting surface
    - fine point tweezers
    - water colour paints and a fine brush

    Metcalfe kits are printed in full colour on to 1mm thick card.
    Ready cut and creased.
    Fully illustrated step by step instructions.

    More Metcalfe kits

    Model kit N: Double track stone viaduct - Metcalfe - PN141

    Model kit N: Double track stone viaduct - Metcalfe - PN141

    € 15,75

    A sturdy and versatile structure that can be constructed as double track or it can be narrowed down to single track (twice as long).

    Length arched sections: double track: 272 mm, single track: 544mm.
    Trackbed width: double track: 58 mm, single track: 25 mm.
    Height to trackbed: 72mm.

    To build the kit you need following:
    - a modellers knife
    - a pair of scissors
    - a steel ruler
    - glue (for example: UHU solvent free all purpose)
    - a cutting surface
    - fine point tweezers
    - water colour paints and a fine brush

    Metcalfe kits are printed in full colour on to 1mm thick card.
    Ready cut and creased.
    Fully illustrated step by step instructions.

    More Metcalfe kits