DCC decoders

AD-2fx is a 2-output DCC accessory decoder for Cobalt type motors and similar devices.

It tolerates a very wide track bus voltage range and offers exceptionally low current draw while static. It is designed to connect straight to track power or your accessory power bus.

The accessory decoder is easy to install, set up and connect to your layout systems.
It can also control multiple point motors on each of its 2 outputs.

Because it has low power needs there is no real need for added boosters just for point motors.

Having directly controlled panel lights for signals plus feedback makes it something special and when it is connected to Cobalt Classic Ω or Cobalt iP Analog, the combination adds two more changeover switches, making it possible to control almost anything you can think of with nothing extra to buy or install.
 

Zen Black decoders are easy to use and have improved automatic braking and shuttle abilities. Also ONE step, simple to use, locomotive set-up and brown-out protection.

Features:

• 5 Amps peak power


• 3 A continuous power


• On-board high-power stay-alive


• 6 functions at 250mA each


• 42mm x 27mm x 13mm


• 12 screw terminals


• One-Step Loco Setup


• Shuttle mode (requires included ABC board for this to function


 

Zen Black decoders are easy to use and have improved automatic braking and shuttle abilities. Also ONE step, simple to use, locomotive set-up and brown-out protection.

Features:

• 1.1 Amps peak power


• 750mA continuous power


• 6 functions at 100mA each


• 22mm x 16mm


• 21 direct, 8-pin & harness


• One-Step Loco Setup


• Shuttle mode (requires ABC boards for this to function)


 

Zen Black decoders are easy to use and have improved automatic braking and shuttle abilities. Also ONE step, simple to use, locomotive set-up and brown-out protection.

This pack includes 1x ABC board to use with automatic braking functionality.

Features:

• 1.1 Amps peak power


• 750mA continuous power


• 6 functions at 100mA each


• 22mm x 16mm


• 21 direct, 8-pin & harness


• One-Step Loco Setup


• Shuttle mode (requires ABC boards for this to function)


 

Zen Blue decoder - 6 pin direct and 8 pin harness - 2 functions - DCC concepts

Zen Blue decoders are easy to use and have built in brown-out protection.

Features:

• 1.1 Amps peak power


• 750mA continuous power


• 2 functions at 100mA each


• 14mm x 9mm


• 6-pin direct and 6 and 8 pin harnesses included


 

Zen Blue decoder - 6 pin direct - 2 functions - DCC concepts

Zen Blue decoders are easy to use and have built in brown-out protection.

Features:

• 1.1 Amps peak power


• 750mA continuous power


• 2 functions at 100mA each


• 14mm x 9mm


• 6-pin direct


 

Zen Blue decoder - 8 pin direct - nano - 4 functions - DCC concepts

Zen Blue decoders are easy to use and have built in brown-out protection.

Features:

• 1.1 Amps peak power


• 750mA continuous power


• 4 functions at 100mA each


• 15mm x 7mm


• 8-pin direct


 

Zen Blue decoder - 8 pin direct - nano - 2 functions - DCC concepts

Zen Blue decoders are easy to use and have built in brown-out protection.

Features:

• 1.1 Amps peak power


• 750mA continuous power


• 2 functions at 100mA each


• 14mm x 7mm x 2,7mm


• 8-pin direct


 

Zen Black decoder - nano - 8 pin harness - 2 functions - DCC concepts

Zen Black decoders are easy to use and have improved automatic braking and shuttle abilities. Also ONE step, simple to use, locomotive set-up and brown-out protection.

Features:

• 1.1 Amps peak power


• 750mA continuous power


• 2 functions at 100mA each


• 16mm x 9mm


• 8-pin harness


• One-Step Loco Setup


• Shuttle mode (requires included ABC board for this to function)


 

Zen Black decoder - nano - 8 pin harness - 2 functions - with ABC module - DCC concepts

Zen Black decoders are easy to use and have improved automatic braking and shuttle abilities. Also ONE step, simple to use, locomotive set-up and brown-out protection.

Features:

• 1.1 Amps peak power


• 750mA continuous power


• 2 functions at 100mA each


• 16mm x 9mm


• 8-pin harness


• One-Step Loco Setup


• Shuttle mode (requires included ABC board for this to function)


 

Zen Black decoders are easy to use and have improved automatic braking and shuttle abilities. Also ONE step, simple to use, locomotive set-up and brown-out protection.

Features:

• 1.1 Amps peak power


• 750mA continuous power


• 4 functions at 100mA each


• 19mm x 12mm


• 8-pin harness


• One-Step Loco Setup


• Shuttle mode (requires ABC boards for this to function)


 

Zen Black decoders are easy to use and have improved automatic braking and shuttle abilities. Also ONE step, simple to use, locomotive set-up and brown-out protection.

Features:

• 1.1 Amps peak power


• 750mA continuous power


• 4 functions at 100mA each


• 19mm x 11mm


• 8-pin harness


• One-Step Loco Setup


• Shuttle mode (requires included ABC board for this to function)


 

These detectors have been designed to be very easy to install. With only a diameter of 4mm, they will fit between the sleepers of Peco Code 100 and Code 75 track.

The detectors are 'Normally Off' and are triggered by a small magnet that is attached to the loco or rolling stock.

Ideal to operate point motors or level crossings
 

Intelligent inductive detector - Legacy Models
The detector works on all layouts powered with every DCC brand or scale and every computer control IO input that can sense a high/low detection.

The detector will detect anything that alters the electrical state in a section. Examples are powered items such as Locomotives, illuminated coaches or rolling stock with resistive wheelsets. Even just a single tail lamp or a lamp in a Guards van or Caboose.

It is simple to install: It needs no soldering or complex set-up. It can be added later or at the time of layout creation. Just create a gap in one rail covering the area you wish to detect and pass the dropper wire which goes from the track power bus to that rail through the hole in the LM-iD coil. No other set-up or fiddling to do. It is that simple.

LM-iD is very easy to connect: every output uses screw terminals and it is possible to easily add an external panel LED and directly connect to and operate both low voltage logic-level things and higher current items such as relays.

One-year warranty.

 

3 pack - Intelligent inductive detector - Legacy Models
The detector works on all layouts powered with every DCC brand or scale and every computer control IO input that can sense a high/low detection.

The detector will detect anything that alters the electrical state in a section. Examples are powered items such as Locomotives, illuminated coaches or rolling stock with resistive wheelsets. Even just a single tail lamp or a lamp in a Guards van or Caboose.

It is simple to install: It needs no soldering or complex set-up. It can be added later or at the time of layout creation. Just create a gap in one rail covering the area you wish to detect and pass the dropper wire which goes from the track power bus to that rail through the hole in the LM-iD coil. No other set-up or fiddling to do. It is that simple.

LM-iD is very easy to connect: every output uses screw terminals and it is possible to easily add an external panel LED and directly connect to and operate both low voltage logic-level things and higher current items such as relays.

One-year warranty.