There are no products in your shopping cart yet.
Metcalfe
A model railway without buildings is hard to imagine.
Mostly you would like to add a station or locomotive shed to your layout.
Also the inhabitants of your model world need houses and shops.
Mostly you would like to add a station or locomotive shed to your layout.
Also the inhabitants of your model world need houses and shops.
Loading...
Model kit OO: Modern Retail Unit - Metcalfe - PN361
€ 19,25
Modern Retail Unit.
By placing two (or more) kits next to each other a longer row with shops can be made.
Area: 200 x 140 mm. Height: 123 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
By placing two (or more) kits next to each other a longer row with shops can be made.
Area: 200 x 140 mm. Height: 123 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Municipal Building - Metcalfe - PO362
€ 21,75
Model kit OO: Municipal Building - Metcalfe - PO362
A large, modern public building with multiple uses, from a small hospital to council offices.
Area: 185 x 199 mm. Height: 100 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
A large, modern public building with multiple uses, from a small hospital to council offices.
Area: 185 x 199 mm. Height: 100 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit OO: low relief Town House - Metcalfe - PO373
€ 11,95
A town house perfect for a back scene. Combine more to create a street row.
Area: 62 x 37 mm. Height: 174mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 62 x 37 mm. Height: 174mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit OO: low relief High street shop - Metcalfe - PO374
€ 12,75
A half relief High street shop front
Area: 112 x 28 mm. Height: 153mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 112 x 28 mm. Height: 153mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Hotel Wednesday - Metcalfe - PO375
€ 19,95
Model kit OO: Hotel Wednesday - Metcalfe - PN375
A quirky low relief Timber framed Hotel, perfect for any High street scene.
Area: 232x65x158mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
A quirky low relief Timber framed Hotel, perfect for any High street scene.
Area: 232x65x158mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Railway Arches - Metcalfe - PO380
€ 19,25
8 half relief shop/garage facades that fill the railway arches on our existing viaduct kits – PO240 and PO241
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: platform underpass- Metcalfe - PO400
€ 7,95
Stairways leading down to an imaginary subway or tunnel.
Pack contains 2 sets of covered underpass stairways.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Old Mill Chimney Stack - Metcalfe - PO401
€ 10,80
Model kit OO: Old Mill Chimney Stack - Metcalfe - PO401
This Chimney Stackfits alongside Old Factory (PO287), Ramshackle Workshop (PO286) and Brewery (PO288).
Dimensions: 118 x 114 x 270 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
This Chimney Stackfits alongside Old Factory (PO287), Ramshackle Workshop (PO286) and Brewery (PO288).
Dimensions: 118 x 114 x 270 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Industrial Overbridge - Metcalfe - PO402
€ 10,25
Model kit OO: Industrial Overbridge - Metcalfe - PO402
This bridge can connect all types of industrial buildings.
Maximum length: 136mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
This bridge can connect all types of industrial buildings.
Maximum length: 136mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Wooden Pavilion- Metcalfe - PO410
€ 7,95
An attractive little building that lends itself to a number of uses such as a sports/cricket pavilion or some sort of clubhouse.
The veranda has laser cut details.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Nissen hut- Metcalfe - PO415
€ 8,95
A hut with a lot of uses Agricultural, Military and Industrial.
Size: 104 x 72mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low Relief Half timbered Shop Front - Metcalfe - PO421
€ 10,25
A medieval shop to fit between modern shops.
Low relief buildings are ideal as a backdrop to any town scene. Also a solution for layouts or dioramas with limited space.
Area (width x depth): 62 x 25 mm, height 150mm.
Depth at roof: 45mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits