There are no products in your shopping cart yet.
buildings N
Loading...
Model kit N: Small factory - Metcalfe - PN183
€ 14,45
A pair of industrial buildings with detailed features and loading platforms.
Great for sidings.
Area: 182 x 70 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Boiler house and factory entrance - Metcalfe - PN184
€ 16,95
The grand entrance and the power house. A vital part to any industrial project.
Includes engine house and mill chimney.
Factory entrance building: 137 x 50 x 157h mm.
Boiler house and engine room: 104 x 70 x 71h mm.
Mill chimney: 21 x 21 x 212 h mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Modern industrial unit - PN185
€ 10,95
A multi use, modern industrial building that offers a wide range of uses.
Kit includes a large selection of alternative signs.
Area: 78 x 68 mm
Height: 42 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Ramshackle Workshop - Metcalfe - PN186
€ 14,45
Model kit N: Ramshackle Workshop - Metcalfe - PN186
Area: 100 x 62 mm. Height: 65 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 100 x 62 mm. Height: 65 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Old Factory - Metcalfe - PN187
€ 16,95
Model kit N: Old Factory - Metcalfe - PN187
Area: 180 x 69 mm. Height: 90 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 180 x 69 mm. Height: 90 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Brewery - Metcalfe - PN188
€ 15,75
Model kit N: Brewery - Metcalfe - PN188
Area: 69 x 63 mm. Height: 165 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 69 x 63 mm. Height: 165 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Firestation - Metcalfe - PN189
€ 14,95
A modern style fire station with a double fire engine garage, side office with an upstairs break room and a fire tower at the rear. A sturdy building that looks good from every angle. A great addition to any village or town model scene.
Area: (width x depth): 106 x 109mm. Height: 82 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: low relief timber framed shop fronts - Metcalfe - PN190
€ 10,95
2 Medieval shop fronts to fit between modern shops.
Kit contains two half shop fronts with a choice of 2 roof styles.
With laser cut parts.
Area wide shop: 55 x 25 mm.
High shop: 33 x 25 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit N - Castle Gatehouse - Metcalfe - PN191
€ 19,25
a beautiful gatehouse which are still seen today in historic towns and cities.
Size building: 119 x 65 (L x W)
Maximum height: 107 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit N - Watch Tower - Metcalfe - PN192
€ 8,45
To use between curtain walls or as a a stand alone folly.
Size: 26 x 26 x 78 mm (L x W x H)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit N - Curtain walls - Metcalfe - PN193
€ 10,95
These wall sections are idea to build your castle or fortify your model town.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit N - Castle Hall - Metcalfe - PN194
€ 17,95
The beating heart of a castle.
Size main building: 118 x 71 x 140 mm (L x W x H)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits