There are no products in your shopping cart yet.
buildings OO
2 / 2
Loading...
Model kit OO/HO: Little Cardleywick Station Shelter- Metcalfe - PO316
€ 12,00
A beautiful small station shelter to accompany the “Little Cardleywick Station”
Area: 92 x 40 mm.
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
Model kit OO/HO: Mainline station Booking Hall - Metcalfe - PO320
€ 29,95
The centerpiece to your mainline station with grand entrance from street level through to platform.
Nicely detailed on the rail side with laser cut canopy, easily extended with the addition of wall backed canopy kit PO341.
Area: 281 x 160 mm.
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: parcels office - Metcalfe - PO321
€ 27,75
A multi-use building which can form part of a larger station scene when stood along side Mainline Station PO320 Booking Hall and PO341 Wall backed Canopy or use as stand alone building.
Kit includes short length of platform and ramp building at rear giving street level access.
Area: (width x depth): 213 x 112mm.
Ramp building: 137 x 50 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Island platform building - Metcalfe - PO322
€ 23,95
A central platform waiting room surrounded by finely detailed laser cut canopies.
Extend the canpy with the matching canopy kit PO340. Platform is not included. Use with platform kit PO235.
Area: (width x depth): 283 x 91mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Modern Platform Shelter - Metcalfe - PO323
€ 14,45
Model kit OO: Modern Platform Shelter - Metcalfe - PO323
A modern style platform shelter that would look great on any layout. Comes with option of red brick or stone.
Area: 162 x 58 x 64 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
A modern style platform shelter that would look great on any layout. Comes with option of red brick or stone.
Area: 162 x 58 x 64 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: GWR Signal Box - Metcalfe - PO330
€ 19,95
A beautifully detailed kit with fine scale laser cust stairs and timber frame.
Choise of stone or red brick style all in the one kit.
The steps can also be built up in a variety of ways.
Area: 145 x 60 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: single track Engine shed - red brick - Metcalfe - PO331
€ 19,95
A small engine shed with workshop at the rear.
Ideal for branch line use.
With lots of details: relief window lintels and sills. Beautifully printed red and blue brick.
Area: 235 x 85 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: single track Engine shed - stone - Metcalfe - PO332
€ 19,95
A small engine shed with workshop at the rear.
Ideal for branch line use.
With lots of details: relief window lintels and sills. Beautifully printed in Metcalfe 'M' style stone work.
Area: 235 x 85 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Settle / Carlisle railway station - Metcalfe - PO333
€ 29,95
A beautifully detailed replica of the smaller style railway stations found along the S&C Railway.
A die cut card construction kit with enhanced fine laser cut window frames, barge boards and roof ridge tiles.
Area: 315 x 122 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Settle / Carlisle railway station shelter - Metcalfe - PO334
€ 13,95
A beautifully detailed replica of a platform shelter found along the S&C Railway.
Matches the Settle & Carlisle Railway Station.
A die cut card construction kit with enhanced fine laser cut window frames, barge boards and roof ridge tiles.
Area: 168 x 50 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Settle / Carlisle railway station masters house - Metcalfe - PO335
€ 17,95
A classic period railway house. Designed to stand along side the S&C Railway range of buildings.
A die cut card construction kit with enhanced fine laser cut window frames, barge boards and roof ridge tiles.
Area: 141 x 135 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Settle Carlisle Railway Goods shed - Metcalfe - PO336
€ 29,95
A sturdy goods depot. Designed to stand along The Settle and Carlisle range of buildings.
A beautifully detailed card construction kit with die and laser cut components.
Shed: 268 x 132 mm.
Office: 82 x 56mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: double track Engine shed - stone - Metcalfe - PO337
€ 29,95
A sturdy double track stone engine shed with lots of detailing.
With laser cut roof trusses that make the interior detailing more authentic, and can be clearly seen through the roof windows.
Includes a separate workshop building that can be attached to the shed at any position or used free standing.
With lots of details: relief window lintels and sills. Beautifully printed stone.
Area: 323 x 140 mm
Workshop: 100 x 65mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Platform canopy kit - Metcalfe - PO340
€ 20,45
A versatile and extendable two bay platform shelter, made with fine detailed laser cut components.
Double sided ideal for island platforms.
Combine with platform kit PO216 or PO235 to create a complete sheltered platform.
Area: (width x depth): 144 x 91mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Wall backed Platform canopy - Metcalfe - PO341
€ 20,45
A versatile single sided platform shelter, made wit fine detailed laser cut card components.
Designed to stand alongside Mainline station kit PO320.
Kit includes short length of platform.
Easily expanded with the addition of more kits to build large station canopies.
Area: (width x depth): 215 x 65mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: No 1 Market Street - Metcalfe - PO350
€ 19,95
A Timber Framed heritage style building.
Area: 120 x 75 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit OO: low relief Tower Block - Metcalfe - PO360
€ 20,45
A modern age tower block. Perfect for a back scene. Combine two and you end up with a complete building.
Area: 140 x 70 mm. Heigh: 212mm.
New design
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 140 x 70 mm. Heigh: 212mm.
New design
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Modern Retail Unit - Metcalfe - PN361
€ 19,25
Modern Retail Unit.
By placing two (or more) kits next to each other a longer row with shops can be made.
Area: 200 x 140 mm. Height: 123 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
By placing two (or more) kits next to each other a longer row with shops can be made.
Area: 200 x 140 mm. Height: 123 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Municipal Building - Metcalfe - PO362
€ 21,75
Model kit OO: Municipal Building - Metcalfe - PO362
A large, modern public building with multiple uses, from a small hospital to council offices.
Area: 185 x 199 mm. Height: 100 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
A large, modern public building with multiple uses, from a small hospital to council offices.
Area: 185 x 199 mm. Height: 100 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit OO: low relief Town House - Metcalfe - PO373
€ 11,95
A town house perfect for a back scene. Combine more to create a street row.
Area: 62 x 37 mm. Height: 174mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 62 x 37 mm. Height: 174mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit OO: low relief High street shop - Metcalfe - PO374
€ 12,75
A half relief High street shop front
Area: 112 x 28 mm. Height: 153mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 112 x 28 mm. Height: 153mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Hotel Wednesday - Metcalfe - PO375
€ 19,95
Model kit OO: Hotel Wednesday - Metcalfe - PN375
A quirky low relief Timber framed Hotel, perfect for any High street scene.
Area: 232x65x158mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
A quirky low relief Timber framed Hotel, perfect for any High street scene.
Area: 232x65x158mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Railway Arches - Metcalfe - PO380
€ 19,25
8 half relief shop/garage facades that fill the railway arches on our existing viaduct kits – PO240 and PO241
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: platform underpass- Metcalfe - PO400
€ 7,95
Stairways leading down to an imaginary subway or tunnel.
Pack contains 2 sets of covered underpass stairways.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Old Mill Chimney Stack - Metcalfe - PO401
€ 10,80
Model kit OO: Old Mill Chimney Stack - Metcalfe - PO401
This Chimney Stackfits alongside Old Factory (PO287), Ramshackle Workshop (PO286) and Brewery (PO288).
Dimensions: 118 x 114 x 270 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
This Chimney Stackfits alongside Old Factory (PO287), Ramshackle Workshop (PO286) and Brewery (PO288).
Dimensions: 118 x 114 x 270 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Industrial Overbridge - Metcalfe - PO402
€ 10,25
Model kit OO: Industrial Overbridge - Metcalfe - PO402
This bridge can connect all types of industrial buildings.
Maximum length: 136mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
This bridge can connect all types of industrial buildings.
Maximum length: 136mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Wooden Pavilion- Metcalfe - PO410
€ 7,95
An attractive little building that lends itself to a number of uses such as a sports/cricket pavilion or some sort of clubhouse.
The veranda has laser cut details.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Nissen hut- Metcalfe - PO415
€ 8,95
A hut with a lot of uses Agricultural, Military and Industrial.
Size: 104 x 72mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low Relief Half timbered Shop Front - Metcalfe - PO421
€ 10,25
A medieval shop to fit between modern shops.
Low relief buildings are ideal as a backdrop to any town scene. Also a solution for layouts or dioramas with limited space.
Area (width x depth): 62 x 25 mm, height 150mm.
Depth at roof: 45mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Small signal box- Metcalfe - PO430
€ 11,95
Ideal for the small station, laser cut steps with small platform for token working.
Similar in design to the signal box at Goathland station.
Size: 102 x 48mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Platform benches - Metcalfe - PO502
€ 6,95
One double and 4 single benches with laser cut components
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Park benches - Metcalfe - PO503
€ 6,95
Set of 4 benches with laser cut components.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Picnic tables - Metcalfe - PO510
€ 6,95
Set of 3 picnic tables (two square one round). They come with a variety of different umbrella designs. Umbrella poles not included.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Show jumps - Metcalfe - PO511
€ 6,95
A set of four horse jumps.
Unpainted laser cut kit.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Chldrens play area - Metcalfe - PO513
€ 7,95
A set of two laser cut children’s play areas, both are ‘mirror images’ of each other so you can easily customise the build and add multiple kits together to make large adventure playgrounds.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO - greenhouse - Metcalfe - PO514
€ 7,25
A greenhouse is a essential part of a larger rural garden.
Size greenhouse: 48 x 30 mm (L x W)
Cold frame: 25 x 15 mm (L x W)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Station Clocks - Metcalfe - PO515
€ 6,75
A set of three station clocks.
One wall clock and two overhead clocks.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Platform Kiosk - Metcalfe - PO517
€ 7,95
A busy looking and finely detailed little newspaper and magazine stand.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Pillboxes - Metcalfe - PO520
€ 6,75
A pair of WWII type 22 & 26 reinforced concrete machine gun emplacements.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Bus shelter - Metcalfe - PO525
€ 7,95
Laser cut card kit featuring shelter, bus stop signs, litter bin and a collection of posters and timetables.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Market stalls - Metcalfe - PO530
€ 7,95
Two laser cut market stalls a side stall and a centre stall.
2 stalls come with a variety of stall artwork and choice of canvas roofs.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: goods yard crane - Metcalfe - PO540
€ 8,45
A detailed laser cut card kit. Perfect for the interior of a goods shed or any goods platform.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Water Wheel - Metcalfe - PO541
€ 8,45
Model kit OO: Water Wheel - Metcalfe - PO541
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Arcade fronts - Metcalfe - PO572
€ 7,95
Ornate iron style canopy designed specifically to enhance kits PO272 and PO273.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: signal box interior - Metcalfe - PO580
€ 7,95
Laser cut card kit featuring lever frames, gate wheel, stove chairs and more.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits