There are no products in your shopping cart yet.
Metcalfe
A model railway without buildings is hard to imagine.
Mostly you would like to add a station or locomotive shed to your layout.
Also the inhabitants of your model world need houses and shops.
Mostly you would like to add a station or locomotive shed to your layout.
Also the inhabitants of your model world need houses and shops.
2 / 4
Loading...
Model Kit N: Castle Wall Bridge - Metcalfe - PN196
€ 10,20
An opening in the castle wall allows a road or railroad passing through the Castle grounds.
Area: 148 x 15 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 148 x 15 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: picnic tables - Metcalfe - PN810
€ 6,75
Kit with 4 square picnic tables with a variety of umbrellas. Umbrella pole not included.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N - greenhouse - Metcalfe - PN814
€ 6,25
A greenhouse is a essential part for a larger rural garden.
Size greenhouse: 26 x 18 (L x W)
Cold frame: 26 x 18 mm (L x W).
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Nissen hut - Metcalfe - PN815
€ 6,95
A hut with many uses. Military, Industrial or Agricultural.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: platform underpass - Metcalfe - PN816
€ 6,75
Kit contains two covered underpass stairways.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: platform kiosk - Metcalfe - PN817
€ 6,75
A busy looking and finely detailed newspaper and magazine stand.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: wooden pavilion - Metcalfe - PN821
€ 7,25
A fine detailed cricket or sports club house.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: market stalls - Metcalfe - PN830
€ 6,75
4 market stalls with a variety of canvas roofs.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: goods yard crane - Metcalfe - PO840
€ 6,75
A detailed laser cut card kit. Perfect for the interior of a goods shed or any goods platform.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Water Wheel - Metcalfe - PN841
€ 6,75
Model kit N: Water Wheel - Metcalfe - PN841.
Benodigdheden om het bouwpakket te bouwen:
- een scherp hobbymes
- een schaar
- een stalen liniaal
- lijm (bijvoorbeeld UHU alleslijm zonder oplosmiddel)
- een snijmat
- een pincet
- waterverf in verschillende kleuren
Metcalfe bouwpakketten zijn gedrukt op 1mm dik karton, voorgesneden en gerild
Inclusief uitgebreide Engelstalige bouwbeschrijving.
Meer bouwpakketten van Metcalfe
Benodigdheden om het bouwpakket te bouwen:
- een scherp hobbymes
- een schaar
- een stalen liniaal
- lijm (bijvoorbeeld UHU alleslijm zonder oplosmiddel)
- een snijmat
- een pincet
- waterverf in verschillende kleuren
Metcalfe bouwpakketten zijn gedrukt op 1mm dik karton, voorgesneden en gerild
Inclusief uitgebreide Engelstalige bouwbeschrijving.
Meer bouwpakketten van Metcalfe
Red brick builders sheets - Metcalfe - PN900
€ 7,80
4 sheets of thick card, 4 sheets of thin card printed with flemish bond style of brickwork.
Plus 1 sheet of roofing slates on thick card.
Ideal for custom building of retaining walls, bridges and buildings.
Pack contains 8 x sheets 200 x 270mm
Please note colours may slightly vary.
More Metcalfe products
Cut stonework M1 style builders sheets - Metcalfe - PN901
€ 7,80
4 sheets of thick card, 4 sheets of thin card printed with M1 style stone effect.
Plus 1 sheet of roofing slates.
Ideal for custom building of retaining walls, bridges and buildings.
Pack contains 8 x sheets 200 x 270mm
Please note colours may slightly vary.
More Metcalfe products
Cut stonework B1 and M2 style builders sheets - Metcalfe - PN902
€ 7,80
4 sheets of thick card, 4 sheets of thin card printed with B1 and M2 style stone effect.
Plus 1 sheet of roofing slates.
Ideal for custom building of retaining walls, bridges and buildings.
Pack contains 8 x sheets 200 x 270mm
Please note colours may slightly vary.
More Metcalfe products
Paving sheets builders sheets - Metcalfe - PN903
€ 7,80
8 sheets of card printed with weathered effect paving slabs and edging stones.
Ideal for pavements and platform tops.
Pack contains 8 x sheets 200 x 270mm
Please note colours may slightly vary.
More Metcalfe products
Engineers Old Mill style builders sheets - Metcalfe - PN904
€ 7,80
4 sheets of thick card, 4 sheets of thin card printed with Old Mill style stone effect.
Plus 1 sheet of roofing slates.
Ideal for custom building of retaining walls, bridges and buildings.
Pack contains 8 x sheets 200 x 270mm
Please note colours may slightly vary.
More Metcalfe products
Plus 1 sheet of roofing slates.
Ideal for custom building of retaining walls, bridges and buildings.
Pack contains 8 x sheets 200 x 270mm
Please note colours may slightly vary.
More Metcalfe products
Model kit N: Country Goods Shed - Metcalfe - PN912
€ 16,25
Country Goods shed.
Area: 102 x 62 mm. Height: 63 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 102 x 62 mm. Height: 63 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: double track engine shed red brick - Metcalfe - PN913
€ 20,45
A sturdy double track red brick engine shed with lots of detailing.
With laser cut roof trusses that make the interior detailing more authentic, and can be clearly seen through the roof windows.
Includes a separate workshop building that can be attached to the shed at any position or used free standing.
With lots of details: relief window lintels and sills. Beautifully printed stone.
Area: 197 x 81 mm
Workshop: 65 x 37mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Little Cardleywick Station - Metcalfe - PN915
€ 14,40
A beautiful small station “Little Cardleywick Station” from our fictitious village “Little Cardleywick” and the first in a new range. This station has all the features of a large station but takes up very little space.
Area: 109 x 48 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
Area: 109 x 48 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
Model kit N: Little Cardleywick Station Shelter - Metcalfe - PN916
€ 8,40
A beautiful small station shelter to accompany the “Little Cardleywick Station”
Area: 57 x 53 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
Area: 57 x 53 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
Model kit N: Mainline station booking hall - Metcalfe - PN920
€ 26,45
A grand entrance to a large and beautifully detailed railway station.
Includes laser cut mullioned windows and platform canopy.
Designed to be used with the other Metcalfe mainline station add-on kits.
Area: 157 x 85 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Parcels office - Metcalfe - PN921
€ 20,45
A detailed parcels office designed to be used with the other Metcalfe mainline station kits.
Area: 120 x 89 mm (both buildings together).
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Island platform building - Metcalfe - PN922
€ 19,25
A centre platform waiting room with surrounding canopy.
Area: 163 x 51 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Modern Platform Shelter - Metcalfe - PN923
€ 10,25
Model kit N: Modern Platform Shelter - Metcalfe - PN923.
A modern style platform shelter that would look great on any layout. Comes with option of red brick or stone.
Area: 91 x 35 mm. Height: 35 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
A modern style platform shelter that would look great on any layout. Comes with option of red brick or stone.
Area: 91 x 35 mm. Height: 35 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Parish church - Metcalfe - PN926
€ 16,95
An intricate little kit suitable for both town and country.
Includes lychgate and laser cut detailing.
Area: 180 x 85 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: single track engine shed red brick - Metcalfe - PN931
€ 13,95
A small shed with workshop at the rear.
Ideal for branch line use.
Area: 130 x 47 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: single track engine shed stone built - Metcalfe - PN932
€ 13,95
A small shed with workshop at the rear.
Ideal for branch line use.
Area: 130 x 47 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Settle and Carlisle Railway station - Metcalfe - PN933
€ 19,25
A beautifully detailed replica of the smaller style stations found on the Settle & Carlisle Railway.
Area: 163 x 51 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Settle and Carlisle Railway station shelter - Metcalfe - PN934
€ 10,25
A platform shelter as can be found on the Settle & Carlisle Railway.
Area: 163 x 51 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Settle and Carlisle Railway station masters house - Metcalfe - PN935
€ 14,45
A classic period railway house. Designed to stand along side the other Settle & Carlisle Railway buildings. With laser cut components.
Area: 77 x 75 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Settle and Carlisle Goods shed - Metcalfe - PN936
€ 21,75
A sturdy goods depot. Designed to stand alongside the Settle and Carlisle range of buildings Detailed both inside and out.
A beautifully detailed kit with interior details including roof trusses that can be seen through the roof windows.
Shed: 152 x 70 mm
Office: 35 x 30 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: double track engine shed stone - Metcalfe - PN937
€ 20,45
A sturdy double track stone engine shed with lots of detailing.
With laser cut roof trusses that make the interior detailing more authentic, and can be clearly seen through the roof windows.
Includes a separate workshop building that can be attached to the shed at any position or used free standing.
With lots of details: relief window lintels and sills. Beautifully printed stone.
Area: 197 x 81 mm
Workshop: 65 x 37mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: platform canopy - Metcalfe - PN940
€ 19,95
A versatile and extendable four bay platform shelter, made with fine detailed laser cut components.
Area: 162 x 53 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Wall backed platform canopy - Metcalfe - PN941
€ 16,25
A covered platform canopy designed to stand along side the other Metcalfe Mainlide Station series kits
Area: 120 x 37 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Marketstreet No 1 - Metcalfe - PN950
€ 15,75
A timber framed heritage style building, found up and down the country on many high streets housing all sorts of different businesses. A beautiful looking building that would look perfect on any layout or diorama.
Area: 78 x 45 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 78 x 45 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit N: Manor farm buildings - Metcalfe - PN951
€ 13,25
A modern farm building, consisting of: Cow Shed/Barn, Silo Pit and a couple of hen huts.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: low relief tower block - Metcalfe - PN960
€ 14,95
A low relief modern apartment block. Perfect for a back scene. If you combine two you will get a complete building.
Area: 41 x 81 mm. Height: 117mm.
New design
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 41 x 81 mm. Height: 117mm.
New design
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Modern Retail Unit - Metcalfe - PN961
€ 14,95
Modern Retail Unit.
Area: 111 x 80 mm. Height: 66mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 111 x 80 mm. Height: 66mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Municipal Building - Metcalfe - PN962
€ 15,75
Model kit N: Municipal Building - Metcalfe - PN962
Area: 102 x 62 mm. Height: 63 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 102 x 62 mm. Height: 63 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit N: Low relief Bank and Shop - Metcalfe - PN971
€ 13,45
Each shop is a separate building and can be intermingled with other low relief shops.
Bank: 190 x 25 mm (L x W x H)
Shop: 42 x 21 x 92 mm (L x W x H)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit N: Low relief pub and shops - Metcalfe - PN972
€ 12,75
Each shop is a separate building and can be intermingled with other low relief shops.
Corner shop: 45 x 25 x 89 mm (L x W x H)
Shop: 50 x 21 x 86 mm (L x W x H)
Pub: 55 x 25 x 96 mm (L x W x H)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: low relief town house - Metcalfe - PN973
€ 10,95
A town house. Perfect for a back scene. Build a row of houses by combining more kits.
Area: 70 x 24 mm. Height: 110mm.
New design
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 70 x 24 mm. Height: 110mm.
New design
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: low relief High Street shop front - Metcalfe - PN974
€ 10,95
A low relief High street shop front. Perfect for a back scene.
Area: 64 x 18 mm. Height: 86mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 64 x 18 mm. Height: 86mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Hotel Wednesday - Metcalfe - PN975
€ 11,95
Model kit N: Hotel Wednesday - Metcalfe - PN975
A quirky low relief Timber Framed Hotel, perfect for any High street scene.
Area: 1262 x 26 mm. Height: 96 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
A quirky low relief Timber Framed Hotel, perfect for any High street scene.
Area: 1262 x 26 mm. Height: 96 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N - Railway Arches - Metcalfe - PN980
€ 11,95
8 half relief shop/garage facades that fill the railway arches on our existing viaduct kits – PN140 and PN141
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Grimy Old Mill - Metcalfe - PN990
€ 21,60
Model kit N: Grimy Old Mill - Metcalfe - PN990
Area: 135 x 58 mm. Height: 158 mm.
Or half relief: 290 x 37mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 135 x 58 mm. Height: 158 mm.
Or half relief: 290 x 37mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Old Mill Chimney Stack - Metcalfe - PN991
€ 8,45
Model kit N: Old Mill Chimney Stack - Metcalfe - PN991
Area: 20 x 20 mm. Height: 188 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 20 x 20 mm. Height: 188 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Industrial Overbridge - Metcalfe - PN992
€ 8,95
Model kit N: Industrial Overbridge - Metcalfe - PN992
Maximum length: 94mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Maximum length: 94mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief Pub and shops - Metcalfe - PO205
€ 17,95
A pub and two shop frontages with lots of little detailing and variety of signs and interiors.
Each building is independent and can be placed alongside any other low relief building.
This gives you the opportunity to create a unique street on your layout.
Area (width x depth): 265 x 35. Height: 180 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief Cinema and shops - Metcalfe - PO206
€ 14,45
A low relief cinema incorporating two lock-up shops.
A period cinema with a variety of signs for different eras and uses.
Ideal for backdrops where space is limited.
Area (width x depth): 195 x 34. Height: 146 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: platform - red brick - Metcalfe - PO216
€ 18,60
A versatile platform kit that can be built to virually any shape.
This kit will make up to 8 feet of platform at a width of around 2 inches.
Or you can build an island platform 5 ft long x 3 inches wide.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Parish church - Metcalfe - PO226
€ 22,95
A village or town is complete with a church.
The kit comes with clear glazing and fine laser cut recessed stone windows.
The gates in the Lich gate are laser cut.
Area: 245 x 150mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Coaching inn - Metcalfe - PO228
€ 16,80
This is a traditional old English road side halt with an attractive frontage and an arched passageway leading throuh to a small yard at the rear.
Originally built to serve the horse drawn coaches of the 18th and 19th centuries on their long journeys from town to town. The Inn will also have served the motor coaches of the 20th century taking day trippers from towns and cities to the sea side.
Area: 160 x 152.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Goods shed - Metcalfe - PO332
€ 18,75
A small country goods depot. Detailed inside and out.
Kit also includes weighbridge office.
Area: 237 x 110 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Signal Box - Metcalfe - PO233
€ 13,75
Although based on a standard L.N.W.R. style signal box this kit will suit most layouts.
The kit also includes a lineside shed and a lamp hut.
An attractive kit with clear plastic windows and fine scale plastic steps..
Area: 96 x 50 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: platform - stone - Metcalfe - PO235
€ 18,60
A versatile platform kit that can be built to virually any shape.
This kit will make up to 8 feet of platform at a width of around 2 inches.
Or you can build an island platform 5 ft long x 3 inches wide.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: footbridge - Metcalfe - PO236
€ 16,80
An attractive card kit with clear plastic windows and moulded plastic steps.
The footbridge span is 174mm but it can be cut down easily for a narrower span if required.
Adding on extra kits to extend the footbridge is easily done.
The kit also incorporates optional base steps enabling the bridge to be used from trackbed or platform height.
Area: (width x depth): 230 x 105mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: country station - Metcalfe - PO237
€ 22,80
Based on the standard designs used by the Cheshire Lines Railway and the Manchester, Sheffield and Lincolnshire Railway Company.
A beautiful red brick station kit with extra waiting rooms and canopy for the opposite platform.
Area: 295 x 91 mm.
Shelter: 192 x 60 mm.
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Double track brick viaduct - Metcalfe - PO240
€ 22,80
A strong and sturdy two track viaduct.
The structure is easliy customised to make shorter (height or length) or longer with extra kits.
Height to trackbed: 132 mm.
Trackbed width: 100mm.
Overall length: 735 mm (incl. end wall sections).
Each arch width: 102mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Double track stone viaduct - Metcalfe - PO241
€ 22,80
A strong and sturdy two track viaduct.
The structure is easliy customised to make shorter (height or length) or longer with extra kits.
Height to trackbed: 132 mm.
Trackbed width: 100mm.
Overall length: 735 mm (incl. end wall sections).
Each arch width: 102mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: double track tunnel entrances - Metcalfe - PO242
€ 15,00
A pair of sturdy double track tunnel entrances complete with inner walls.
Width of tunnel entrance: 118mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits