There are no products in your shopping cart yet.
homes and shops
Shops and homes make a town or city. A couple of the models are available in low relief. These have the advantage of not taking up a lot of space and are ideal for small layouts or dioramas. Also very suitable for backdrops.
We offer a small range of houses, shops, farms, a school and a church to create a small village on your model railway.
We offer a small range of houses, shops, farms, a school and a church to create a small village on your model railway.
Loading...
Model kit OO/HO: Low relief Pub and shops - Metcalfe - PO205
€ 17,95
A pub and two shop frontages with lots of little detailing and variety of signs and interiors.
Each building is independent and can be placed alongside any other low relief building.
This gives you the opportunity to create a unique street on your layout.
Area (width x depth): 265 x 35. Height: 180 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Parish church - Metcalfe - PO226
€ 22,95
A village or town is complete with a church.
The kit comes with clear glazing and fine laser cut recessed stone windows.
The gates in the Lich gate are laser cut.
Area: 245 x 150mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Coaching inn - Metcalfe - PO228
€ 16,80
This is a traditional old English road side halt with an attractive frontage and an arched passageway leading throuh to a small yard at the rear.
Originally built to serve the horse drawn coaches of the 18th and 19th centuries on their long journeys from town to town. The Inn will also have served the motor coaches of the 20th century taking day trippers from towns and cities to the sea side.
Area: 160 x 152.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Manor Farm house - Metcalfe - PO250
€ 14,45
A 17th century stone built farm house and farm workers cottage..
Area: 126 x 125.
Cottage: 86 x 101 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Village school - Metcalfe - PO253
€ 14,45
A small country school with bike shed and out building.
Also makes a great village hall or library.
Area: 142 x 152.
Outbuilding: 130 x 40mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Village shop and cafe - Metcalfe - PO254
€ 16,95
A beautifully detailed little rural building.
Area: 193 x 124.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Workers cottages - Metcalfe - PO255
€ 17,95
Based on the railway workers cottages along the Settle to Carlisle Railway, these beautiful buildings suit many uses whether it be railway, rural or urban.
Area: 140 x 110.
Shed: 60 x 48mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO - Grange house - Metcalfe - PO257
€ 15,75
A beautifully proportioned country home.
Ideal for village style scenes.
Size main building: 155 x 120 (L x W)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit OO - Gardeners cottage - Metcalfe - PO258
€ 13,45
A gardeners cottage which would fit in any village. With laser cut detailing. Perfect for a rural scene.
Kit includes three optional extensions to customize the main cottage.
Size main building: 90 x 71 x 99 mm (L x W x H)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit OO - Crofters cottage - Metcalfe - PO259
€ 11,95
A tiny cottage with optional barn conversion which would fit in any village. Perfect for a rural scene.
Kit includes two optional extensions to customize the main cottage.
Kits can be added to each other to form a row of cottages.
Size main building: 110 x 60 x 100 mm (L x W x H)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit OO - Town end cottage - Metcalfe - PO267
€ 17,95
A tipical mediaval cottage based on the village of Lacock, Wiltshire famed for its appearances in many TV shows and films..
Size building: 186 x 122 mm (L x W)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief bank and shop - Metcalfe - PO271
€ 16,25
A detailed high street bank with accompanying shop next door.
Each with a variety of signs and interiors for different uses and periods.
Ideal for backdrops where space is limited.
Bank: (width x depth): 172 x 36mm. Height: 167 mm.
Shop: (width x depth): 83 x 26 mm. Height: 161 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief department store - Metcalfe - PO279
€ 19,25
A finely detailed shop with added laser cut detailing.
Can be easily extended with extra kits to form double ended building.
Could also be placed back to back to make a stand alone building.
Ideal for backdrops where space is limited.
Area: (width x depth): 180 x 36mm. Height: 182 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Service station - Metcalfe - PO281
€ 19,25
A small town or country garage building with showroom and service bays, petrol pumps and canopy.
Area: 171 x 146.
Canopy: 79 x 133 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Terraced houses red brick - Metcalfe - PO300
€ 21,00
New redesigned pair of beautiful houses complete with back yards and paving slabs in the front.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 160.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Terraced houses stone - Metcalfe - PO301
€ 21,00
New redesigned pair of beautiful houses complete with back yards and paving slabs in the front.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 160.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief - Terraced houses red brick - Metcalfe - PO302
€ 19,25
New redesigned 2 pair of beautiful low relief houses complete with paving slabs in the front.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 60.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief - Terraced houses stone - Metcalfe - PO303
€ 19,25
New redesigned 2 pair of beautiful low relief houses complete with paving slabs in the front.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 60.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief - Terraced houses red brick - backs - Metcalfe - PO304
€ 22,85
New redesigned 2 pair of beautiful low relief houses backs complete with back yards.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 106 (one pair).
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief - Terraced houses stone - backs - Metcalfe - PO305
€ 22,85
New redesigned 2 pair of beautiful low relief houses backs complete with back yards.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 106 (one pair).
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief - Shop fronts - brick - Metcalfe - PO306
€ 22,85
New redesigned 2 pair of beautiful low relief shop fronts.
They come as 2 blocks, 1 with 2 shop fronts, the 2nd with a large shop front and an office entrance.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 106 (one pair).
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief - Shop fronts - stone - Metcalfe - PO307
€ 22,85
New redesigned 2 pair of beautiful low relief shop fronts.
They come as 2 blocks, 1 with 2 shop fronts, the 2nd with a large shop front and an office entrance.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 106 (one pair).
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Corner shop or Pub - brick - Metcalfe - PO308
€ 22,85
A dual purpose kit that can be built as either a Corner Shop or a Pub. ( Kit contains 1 building, with the options of 2 frontages)
Designed to be built in a right handed or left handed style to fit either end or our PO300 series of Terraced Houses. Comes with a variety of signs and window interiors.
Create fabulous street scenes using Terraced Houses, or mix in with the Shop Fronts & House Backs.
Dimensions: 137 x 97 x 130mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Corner shop or Pub - stone - Metcalfe - PO309
€ 22,85
A dual purpose kit that can be built as either a Corner Shop or a Pub. ( Kit contains 1 building, with the options of 2 frontages)
Designed to be built in a right handed or left handed style to fit either end or our PO300 series of Terraced Houses. Comes with a variety of signs and window interiors.
Create fabulous street scenes using Terraced Houses, or mix in with the Shop Fronts & House Backs.
Dimensions: 137 x 97 x 130mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Settle / Carlisle railway station masters house - Metcalfe - PO335
€ 17,95
A classic period railway house. Designed to stand along side the S&C Railway range of buildings.
A die cut card construction kit with enhanced fine laser cut window frames, barge boards and roof ridge tiles.
Area: 141 x 135 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: No 1 Market Street - Metcalfe - PO350
€ 19,95
A Timber Framed heritage style building.
Area: 120 x 75 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit OO: low relief Tower Block - Metcalfe - PO360
€ 20,45
A modern age tower block. Perfect for a back scene. Combine two and you end up with a complete building.
Area: 140 x 70 mm. Heigh: 212mm.
New design
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 140 x 70 mm. Heigh: 212mm.
New design
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Modern Retail Unit - Metcalfe - PN361
€ 19,25
Modern Retail Unit.
By placing two (or more) kits next to each other a longer row with shops can be made.
Area: 200 x 140 mm. Height: 123 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
By placing two (or more) kits next to each other a longer row with shops can be made.
Area: 200 x 140 mm. Height: 123 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Municipal Building - Metcalfe - PO362
€ 21,75
Model kit OO: Municipal Building - Metcalfe - PO362
A large, modern public building with multiple uses, from a small hospital to council offices.
Area: 185 x 199 mm. Height: 100 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
A large, modern public building with multiple uses, from a small hospital to council offices.
Area: 185 x 199 mm. Height: 100 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit OO: low relief Town House - Metcalfe - PO373
€ 11,95
A town house perfect for a back scene. Combine more to create a street row.
Area: 62 x 37 mm. Height: 174mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 62 x 37 mm. Height: 174mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit OO: low relief High street shop - Metcalfe - PO374
€ 12,75
A half relief High street shop front
Area: 112 x 28 mm. Height: 153mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 112 x 28 mm. Height: 153mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Hotel Wednesday - Metcalfe - PO375
€ 19,95
Model kit OO: Hotel Wednesday - Metcalfe - PN375
A quirky low relief Timber framed Hotel, perfect for any High street scene.
Area: 232x65x158mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
A quirky low relief Timber framed Hotel, perfect for any High street scene.
Area: 232x65x158mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low Relief Half timbered Shop Front - Metcalfe - PO421
€ 10,25
A medieval shop to fit between modern shops.
Low relief buildings are ideal as a backdrop to any town scene. Also a solution for layouts or dioramas with limited space.
Area (width x depth): 62 x 25 mm, height 150mm.
Depth at roof: 45mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Arcade fronts - Metcalfe - PO572
€ 7,95
Ornate iron style canopy designed specifically to enhance kits PO272 and PO273.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits