Basic Model servo support for one standard servo

€3.75
15 on stock
sku
EMS-StandardBasic
Basic Model servo support for one standard servo
The basic model is suitable for one standard servo. You can operate one point, signal or barrier gate with this model.
2 M3 bolts and nuts are delivered together with the support to mount a standard servo.
A servo is not included.

How to operate a point
To operate a point with a servo the servo arm needs to be mounted vertically. With a wire thread through the turning point of the servo support one can operate a point.

Operating a arm signal or something else
To operate a arm signal the servo arm needs to be mounted horizontally. The operating wires of a signal can bent in a 90 degrees angle and mounted to a servo arm.

Servo support for standard servos for model railways
With servos one can operate semaphore signals, points and barrier gates. The servo supports are designed for use with standard servo’s (not included). The needed space below a model railway is small as both servo support and servo are small.

The servo support is available in two types.
The basic model and Model 2 for up to three standard servos

Dimensions
Basic model without servo (lxwxh): 60 x 30 x 25 mm

Maximum dimensions standard servo
40 x 20 mm (lxh)
More Information
material plastic
Write Your Own Review
You're reviewing:Basic Model servo support for one standard servo
Your Rating